In the die casting production process, uneven or inappropriate mold temperature often leads to unstable casting dimensions. During the die-casting production process, the ejector castings are deformed, resulting in defects such as thermal pressure, mold sticking, surface depression, internal shrinkage, and hot bubbles.
The quality control of the production process in the die-casting workshop involves every aspect of the die-casting process, from smelting to production debugging to inspection control. Omissions in every link may cause quality accidents. This article mainly introduces the attention points related to die casting production and release agent.
The quality control of the production process in the die-casting workshop involves every aspect of the die-casting process, from smelting to production debugging to inspection control. Omissions in every link may cause quality accidents. This article mainly introduces the attention points related to alloy melting.
The process cycle for die casting consists of five main stages, which are explained below. The total cycle time is very short, typically between 2 seconds and 1 minute.1. Clamping - The first step is the preparation and clamping of the two halves of the die. Each die half is first cleaned from the p
Die Casting is wildly used in industries, but in die casting production, sometimes there may have problems and the reasons are a variety. Here are some examples.