This article mainly introduces the hoisting specification of the whole set of molds connected together. Click on the article to learn about tool preparation, mold installation, die casting machine operation and other requirements.

Auxiliary equipment is equipped for mechanization or automation. Auxiliary devices include: pouring device, spraying. Click for more information.

Compared with other casting technologies, the surface of die-casting is smoother and has a higher dimensional consistency. However, non-standard operations and parameters can also cause many types of defects. We will discuss 10 defects are easily occured in aluminum die casting process.

There are two different methods of die casting processes: hot chamber die casting and cold chamber die casting. This article will introduce you some difference between these two process techniques.

Casting is a process that is widely used in metal industries. There are different processes, such as sandy casting, investment casting, low-pressure casting, die casting, and gravity casting. Here we mainly talk about investment casting and die casting for aluminum material.Die casting is a process

Die Casting is wildly used in industries, but in die casting production, sometimes there may have problems and the reasons are a variety. Here are some examples.

The process cycle for die casting consists of five main stages, which are explained below. The total cycle time is very short, typically between 2 seconds and 1 minute.1. Clamping - The first step is the preparation and clamping of the two halves of the die. Each die half is first cleaned from the p

The aluminum alloy is light, with good thermal conductivity and corrosion resistance. They meet the requirements of energy-saving and emission reduction. Therefore, it is a development trend to use cast aluminum alloy to manufacture automobile transmission cover. However, aluminum alloy workpieces a

Different industries are suitable for different alloy metals, all you need to do is how to choose the die casting metal that suits you.The material selection of the die casting mold is mainly determined by the temperature and type of the casting metal. Commonly used die cast metals for mechanical parts include aluminum alloy, zinc alloy and magnesium alloy.

X-ray machine is bought for aluminum die casting porosity checking for mass production and sample checking.